Setting to [Enabled] will increase the system performance. The selection will not make changes to the settings in the BIOS setup utility, so next time when you power on the system, it will still use the original first boot device to boot up. You must configure second hard drive to Slave mode by setting the jumper accordingly. Press the two levers down to fasten Press down the fan until its four clips get wedged in the holes of the retention mechanism. The module will only fit in the right orientation. It supports three-pin head connector. When enabled, the BIOS will activate the floppy disk drives during the boot process:
While doing the installation, be careful in holding the components and follow the installation procedures. Stock level indicator Close.
MSI P Neo-V, Socket , Intel (MS) Motherboard | eBay
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. The plastic clip at each side of the DIMM slot will automatically close. When the motherboard detects CPU is running programs, it will speed up CPU automatically to make the program run smoothly and faster.
Please do not fold the Serial ATA cable into degree angle. The Spread Mzi function reduces the EMI generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves. Selecting [Disabled] allows users to configure these fields manually. Host cycles that hit the aperture range are forwarded to the AGP without any translation. Settings range from  to  at a 32 increment.
Never pour any liquid into the opening that could damage or cause electrical shock. Pull the lever sideways away from the socket. This setup item allows you to determine the timing of the transition from RAS row address strobe to CAS column address strobe.
Available settings for each item are: Notice 2 Shielded interface cables and A. The on-line description for the selected setup category is displayed at the bottom of the screen. Parallel Port Mode This item selects the operation mode for the onboard parallel port: You can Pay with: Suspend Time Out Minute If system activity is not detected for the length of time specified in this field, all devices except CPU will be shut off.
The S-Bracket offers 2 SPDIF jacks for digital audio transmission one for optical fiber connection and the other for coaxialand 2 analog Line-Out jacks for 4-channel audio output.
MSI P Neo-V – motherboard – ATX – Socket – iP Overview – CNET
Therefore, the description may be slightly different from the latest BIOS and should be held for reference only. Otherwise, the Line-Out connector on the back panel will not function. Lay this equipment on a reliable flat surface before setting it up. For the latest information about CPU, please visit http: The option is for power or overclocking users only. You can clear CMOS by shorting pin while the system is off.
Excellent prompt service, thanks. Option Description [Setup] The password prompt appears only when end users try to run Setup.
Locate the CPU and its retention mechanism on the motherboard. The items under each BIOS category described in this chapter are under continuous update for better system performance. The system resume time is shortened when you disable the function, but system will need an AGP driver to initialize the VGA card.
Revision History Revision V1. The aperture is a portion of the PCI memory address range dedicated to graphics memory address space. For more information on Hyper-threading Technology, go to: Setting to [Enabled] will increase the system performance. Overheating Overheating chipste seriously damage the CPU and system, always make sure the cooling fan can work properly to protect the CPU from overheating.
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.