GODEX 2200 DRIVER

Printer Parts Please use the following diagrams to identify each printer part. Barcode Printer Chapter 1. Label length set by auto sensing or programming. Self-test The Self-Test function in a printer will help the user to troubleshoot whether the printer is operating normally. Label gap and black mark sensing.

Uploader: Shakarn
Date Added: 27 April 2013
File Size: 58.24 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 95178
Price: Free* [*Free Regsitration Required]

Godex EZ-2200 Plus Label Printer

Remove the 2200 Front Cover. This manual also for: Pressing the Pause key while printing, printer will pause the print job, when the Pause key is pressed one more time, the printer will continue with the rest of the print job. Maintenance and Adjustment Page 21 Cable Configuration Holes.

Printer Parts Please use the following diagrams to identify each printer part. For example, if the print job contains 10 labels, press the Pause key after 2 labels are printed to stop printing; Power off the printer, press and hold the Pause key.

Godex Print Head, 203 dpi for EZ-2200Plus/EZ-2250i,

Align the label edge inward, and adjust the Label Feed Guide with the label. At the same time they can be printed without computer.

  ASTRON 11071 DISPLAY DRIVER DOWNLOAD

The USB device is built on the serial port, therefore make sure the interface setting is specified to the assigned port. Flip the Print Head Lever back to its original position. Also See for EZ Programmer’s manual – 22 pages.

It differs by the increased service life and optimal protection against external influences due to the mechanisms and case made of metal. The Self-Test function in a printer will help the user to troubleshoot whether the printer is operating normally.

Communication Interface Paralle Interface Handshake: Don’t show me this message again. Maintenance And Adjustment Chapter 5. Use 3mm hexagon screwdriver to turn the cutter blade clockwise.

Please check the specific print mode, then go into the Setting Mode after power on the printer. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

Page 19 Liner Rewind Sensor and the printer will stop printing until liner has been removed from the printer.

GODEX / Plus Barcode Printer

Face the printer front, and unscrew the Bottom Cover Screw. Connect the cable to the parallel port on the printer and on the PC.

Don’t have an account? Remove the Rewinder Option Cover Plate. The printer supports any Russian fonts loaded into internal memory with 2 MB capacity. Place the printer onto a smooth surface, and open the top cover.

  N1220U WINDOWS 7 DRIVER DOWNLOAD

Control Panel Pressing the Pause key while 2200, printer will pause the print job, when the Pause key is pressed one more time, the printer will continue with the rest of the print job. The strength and distribution of clamping pressure is adjusted by two stops. Pressure Adjustment Pressure Adjustment 1.

Screw the Cutter Cover onto the cutter kit.

After the TPH print line adjustment is completed, use the flat tip screwdriver to tighten up the TPH screws A clockwise as indicated by the arrows. Avoid pushing the guide too far in to damage the label edge.

When printing, no ribbon is necessary; it only requires direct thermal media. Barcode Printer Chapter 1.