Use the roller cleaning paper to remove the dirt from the surfaces of the four 4 drive rollers. Insert the lower pins into the guides located on the bracket. This feature reduces files size and storage requirements by detecting and deleting blank pages within a scanned image. Exit door release 60 of www. However, succeeding products and documents are subject to change without notice.
Note If you select the option to restart the computer, you will also need to restart the scanner. Colour, greyscale, black and white Scanning side: In addition, other information such as the date and time can be specified. The low volume production scanner segment just got a little faster.
Bell & Howell Truper at ScanStore
Power button Turn on the power for the computer. These features include scanning speeds, document sizes, image quality and other hardware related characteristics.
Page 33 Click Install Software. Adjusting The Printing Position Adjusting the Printing Position To add an imprint to the page that will appear on the scanned image, adjust the position of the printer carriage according to the size of the sheets that you want to scan.
Cleaning the Ink Cartridge If the head of the ink cartridge is dirty or if the ink cartridge has not been used for a long period of time, it may not belll properly. The height of truperr documents placed in the feeder tray must not exceed the paper limit mark that appears on the right side of the document guide.
Page Insert the upper pins on the imprinter unit into the guides located on the bracket. The scanner mode in which the documents are automatically fed, rather than manually fed, into the document feeder.
Page 76 Open the retard cover in the direction of the arrow shown in the diagram by pulling up from the indent on the right side. Howelp Selecting Multicolor Dropout 1. Retard cover Retard roller Indent Use the roller cleaning paper to remove the dirt from the surface of the retard roller.
General Guidelines Do not scan official documents or copyrighted material: Page To set other howelo parameters, see the instructions for your scanning or document management software application.
Note Before you insert the connector, be sure to match the rib on the imprinter cable connector with the slot on the scanner connector. The User Utility Setup is performing the installation. Connect with a USB 2.
Add to comparison chart. Removing Paper Jams from the Exit Path Pull the exit stopper forward and raise the feeder tray in the direction of the arrow until the tray clicks into place. The manual contains information about scanner operations, cleaning and maintenance and information about the User Utility messages and error codes.
E File UK Ltd. This includes replacing a variety of parts that become worn as the scanner is used. Safety Precautions for the Operating Environment The Scanner Biwe The following safety precautions and proper handling instructions are recommended for your safety and to extend the life of the scanner: Low prices AND expert support.
Caution Do not place your hand inside the unit. Guide the board into place along the rails located inside the scanner. If ADF option is also checked, only scanners with both features will be found.
Where Hlwell can download drivers for my scanner?
Bowe Bell + Howell Truper Plus Document Scanner
The following table explains the error codes and messages and describes possible causes. Place your fingers on the tabs on the sides of the roller module and pull down the roller module in the direction of the arrow as shown in the diagram.
Comments to this Manuals Your Name. Re-installing the Interface Board Insert the interface board into the unit. Whatever your scanning needs, Truper helps you get it done faster and more efficiently. Oops – we don’t appear to have a video for the Truper Plus.
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.