Featuring an advanced proprietary hardware and software design, Intelligent Energy Saver is a revolutionary technology that delivers unparalleled power savings. Unplug the p o w e r cord from the wall socket before touching any c o m p o n e n t. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. Hold the C P U by the edges where are m a r k e d with black lines. This cap must be placed if returning the motherboard for after service. If no jumper cap is placed on pins, the jumper is “Open”. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again.
A p p l y thermal interface material onto c e n t e r of IHS on the socket surface.
Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment 945gc,-s ASRock.
Please select “Front Mic” as default record device. Enter Advanced Settings, and then select Chipset Configuration.
Step 1 – 1. M a k e sure the red-striped side of the cable is plugged into Pin1 side of the connector. Products and corporate names appearing in this guide may 94gcm-s may not be registered trademarks or copyrights of their respective companies, and are used only 945gcm-z identification or explanation and to the owners’ benefit, without intent to infringe. Please refer to below steps for the software setting of Multi-Streaming.
Please refer to below illustrations for the pin definition of onboard headers.
GAGCM-S2L (rev. ) | Motherboard – GIGABYTE Global
To activate the front mic. Rotate the load plate to fully open position at approximately degrees.
Please select “Mixer ToolBox” ;click “Enable playback multi-streaming”, and click “ok”. Otherwise, the CPU will be seriously damaged.
Please refer to the warning on page 6 for the possible overclocking risk before you apply Untied Overclocking Technology.
Rotate the load lever to fully o p e n position at 945gm-s degrees. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters.
ASROCK GCM-S Installation guide |
Doing so m a y d a m a g e the motherboard. Overclocking may affect your system stability, or even cause damage to the components and devices of your system.
This cap must be placed if returning the motherboard for after service. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! In no event shall ASRock, its directors, officers, employees, or agents be liable for 495gcm-s indirect, special, incidental, or consequential damages including damages for loss of profits, loss of business, loss of data, interruption of business and the likeeven if ASRock has asjs advised of the possibility of such damages arising from any defect or error in the guide or product.
Before 945gm-s of “User Manual” in the support CD. The Support CD that came with the motherboard contains necessary drivers and useful utilities that will enhance motherboard features.
If you use AC’97 audio panel, please install it to the front panel audio header as below: You don’t need to connect them for AC’97 audio panel. Then reboot your system.
Verify that the C P U is within the socket and properly mated to t h e orient keys. If you want to have more information about the usage of these headers, please refer to the content of this quick installation guide for auss.
If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard.
ASRock 945GCM-S, LGA775 Socket, Intel Motherboard
95gcm-s the setting of “Hyper Threading Technology”, please check page 30 3. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. Unplug the p o w e r cord from the wall socket before touching any c o m p o n e n t. Installing a n expansion card Step 1.
Asrock 945GCM-S 1.20 motherboard BIOS – AM79HA9I
Please short pin2, pin3. Then, the drivers c o m p a t i b l e to your system can be auto-detected and listed on the support C D driver page.
Operation is subject to the following two conditions:
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.