Press the Start key. Table of Contents Add to my manuals Add. Setting Range 67 to , 1 step: Full Detecting Sensor PC34 8. Remove two screws at the front of the IU.

Uploader: Faezahn
Date Added: 12 March 2013
File Size: 41.97 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 51571
Price: Free* [*Free Regsitration Required]

Setting Description 1 Copy per 1 copy cycle. Boards in a location exposed to direct sunlight and high tem- perature. Snap off one C-ring from the rear side of the pul- ley assy. Enter text from picture: Faulty Hsync 13 C Paper Take-Up Roll 3.

Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleichwertigen Typ. It is not possible to change or reset the sensor output 11531id. Scanner and Mirrors Carriage Moveme Full Detecting Sensor PC34 8.

Press the Meter Count key.

It is unlocked when the tray is slid into the unit. Toner Replenishing Motor Malfunction C Toner Replenishing Mechanism Page 44 – For malfunction troubleshooting, start with step 1 and onward.


Removal of the PH Unit 1. Click here for additional manufacturers. Wind the cable at the front. To give better reproduction of faint 1531od.

Misfeed Detection Sensor Layout Boards must not be indiscriminately removed from their protective deve,op bags. For details, see the relevant option service manual.

REBKKTN toner for Develop D ID quick and low priced

In addition, the fan motor pulls paper being transported up through suction force to help stabilize paper transport. Types of Misfeed Detection and Detection Timings Pour one packet of developer.

Compatible toner for Develop D ID. Mode permits the set- tings of the following functions.

Develop D 1531iD Service Manual

Original printer accessories for Develop D ID. Setting in the Adjust Mode Code No. D Installation of the Mechanical Counter Option Toner Bottle Home Position Detectio Using a soft cloth dampened with alcohol, wipe the Ds Collars clean of dirt.

Low image density 4. Unplug all connectors from the Control Board.


Using a soft cloth dampened with alcohol, wipe the CCD Sensor clean of dirt. If you order by 5: Enables Auto Tray C28 to 33 Switching.